酒店活动隔断
你好,欢迎来到山东科友装饰工程有限公司官方网站!加入收藏山东科友装饰工程有限公司联系我们
科友装饰
全国服务热线
  • 科友装饰 创新设计
  • KY-100型隔断
  • KY-85型隔断

科友动态

当前位置:首页-科友资讯 > 科友动态 >

石膏板高隔间在制作和使用有哪些区别?

文章来源:www.sdkeyou.com   日期:2017-05-05

一、纸面石膏板分正反面,通常有打字标记的一面为反面,应该将反面一侧面对轻钢龙骨。
A gypsum board is divided into positive and negative sides, usually marked with a side of the mark, the opposite side of the light steel keel.
二、高隔间高度大于纸面石膏板的板长时,在横接缝处应设一根横撑,以增强隔墙的稳定性。当隔墙高大于3.6米时,应在竖向龙骨的上下方各装一排横撑,以保证两侧纸面石膏板错缝排列。
Two, the height of the height is greater than the length of the gypsum board, the transverse joints should be set up to support the stability of the wall. When the wall is greater than 3.6 meters high, should be in the upper and lower vertical keel is respectively provided with a row of transverse brace, to ensure that both sides of plasterboard in staggered arrangement.
三、纸面石膏板与龙骨的连接采用钉、粘、夹具卡等方式,其中用自攻螺钉固定应用较多。
Three, gypsum board and keel connection using nails, adhesive, fixture cards, etc., with the use of self tapping screws fixed more.
四、为利于防火,纸面石膏板应纵向安装。
Four, in order to facilitate fire, paper gypsum board should be installed vertically.
五、纸面石膏可采用单层、双层和多层, 金属骨架的相互连接安装双层或多层纸面石膏板时,相邻两层板的接缝应错开。
Five, gypsum can be used single layer, double layer and multi-layer, the metal skeleton of each other to connect the installation of double layer or multi-layer gypsum board, adjacent to the two layers of the seam should be staggered.
六、纸面石膏板之间的接缝有明缝和暗缝两种。明缝一般适用于公共建筑大房间的高隔间;暗缝适用于居住建筑小房间的隔墙。
酒店活动隔断
Six, the gypsum board between the seam seam with bright and dark two. The bright seam is generally applicable to the large room of the public building; the dark seam is suitable for the partition of the small room of the residential building.
暗缝做法是:将板边缘刨成斜面倒角,再与龙骨固定,安装后在接缝处填腻子,待初凝后再抹一层腻子,然后粘贴穿孔纸带,水分蒸发后,用腻子将纸带压住,与墙抹平。
Blind-stitch approach is: the plate edges bevelled chamfer, with fixed keel, after the installation of putty filling at the seams, until the initial setting after wiping a layer of putty, and then paste the punched tape, the water evaporates, putty will press the tape, and smooth wall.
明缝的做法是:安装板材时留8~12mm的间隙,再用石膏油腻子嵌入并用勾缝工具勾成凹缝,或在明缝中嵌入铝合金压条。
The joint approach is: installation plate stay 8 ~ 12mm gap, then oil and gypsum putty embedding pointing tool hook into the concave seam, or in topstitching embedded in Aluminum Alloy layering.
七、为避免纸面石膏板吸水变形,应在纸面石膏板安装后即做防潮处理。防潮处理一般有两种方法,一种是刮腻子裱壁纸或进行其他装饰,一种是用涂料防潮。
Seven, in order to avoid paper gypsum board water absorption deformation, should be in the gypsum board after the installation of moisture treatment. Generally, there are two ways to prevent moisture treatment. One is to scrape the putty on the wallpaper or other decorations.

上一篇:石膏板高隔间在制作和使用有哪些区别?
下一篇:活动隔断的日常使用要学会的妙招
科友产品
招商咨询热线
咨询热线